PD design • positive rake angle for aggressive cutting • for sawing rust and acid-resistant steels and exotic alloys • for medium and large cross-sections       Range availability   Sales units: • coil length 250 ft. • welded-to-length band saw blades Item-Groups: 526, 529, 530 and 531 Band width: 11/16 to 5 inches Constant tooth pitches: 0,75 to 3 tpi Variable tooth pitches: 0,55-0,75 to 3-4 tpi Tooth form: Hook Tooth (K) Type of tooth set: Raker set (SD)         PW design • excellent machining performance and edge life • for rust and acidresistant steels and exotic alloys • shorter cutting times and a longer life with large material cross-sections   Range availability   Sales units: • coil length 250 ft. • welded-to-length band saw blades Item-Groups: 526, 529, 530, 531, 536 and 538 Band width: 11/16 to 5 inches Constant tooth pitches: 0,75 to 3 tpi Variable tooth pitches: 0,55-0,75 to 3-4 tpi Tooth form: Hook Tooth (K) Type of tooth set: Raker set (SD)         PE design • highest possible surface finish because of the dual-sided ground tooth profiles • especially suited to sawing aluminum   Range availability   Sales units: only welded-to-lengthband saw blades Item-Groups: 520 to 531 Band width: 11/16 to 25/8 inches Constant tooth pitches: 3 to 18 tpi Variable tooth pitches: 3-4 to 10-14 tpi Tooth form: S, K Type of tooth set: SD, GS         SF design (step set) • for large profile girders and large self-stressing work pieces • due to the wide cutting channel, pinching of the band saw blades is prevented   Range availability   Sales units: • coil length 250 ft. • welded-to-length band saw blades Item-Groups: 522 Band width: 13/8 to 21/8 inches Constant tooth pitches: 2-3 and 3-4 tpi Tooth form: K