PROFLEX® PREMIUM M42

The hard material coated band saw blade for profiles

  • Product level 2
  • Profile tooth
  • Profiles
  • Band width 34 x 1.1 - 67 x 1.6mm
    Band width 1-3/8 x 0.042 - 2-5/8 x 0.063 Inch

 

Request a quote

PROFLEX® PREMIUM M42 — The hard material-coated band saw blade for profiles

The PROFLEX® PREMIUM M42 is equipped with a special profile tooth form, which have a positive rake angle and a reinforced tooth back. The susceptibility to broken teeth and the occurrence of vibrations are thus significantly reduced.
This special design results in particularly high tooth stability in continuous use.

 

The PROFLEX® PREMIUM M42 is equipped with a special profile tooth form, which have a positive rake angle and a reinforced tooth back. The susceptibility to broken teeth and the occurrence of vibrations are thus significantly reduced. This special design results in particularly high tooth stability in continuous use.

Application Range

Application

  • Profiles and girders in the steel construction sector and for industrial profile cuts
  • Optimal for cutting with interrupted cutting channel

Advantages

  • Productivity increase due to highest cutting rates
  • Less frequent blade changes due to increased blade-life
  • Less re-working due to low-burr cutting edges

Features

  • Tooth edge and back edge with wear protection layer
  • Variable tooth pitch with specific special limitation
  • Extremely stable tooth geometry
  • Coated M42 tooth edge with positive rake angle

Dimensions

Tooth pitch in ZpZ

Width x thickness
mmInch
20 x 0.903/4 x 0.035
27 x 0.901-1/16 x 0.035
34 x 1.101-3/8 x 0.042
41 x 1.301-5/8 x 0.050
54 x 1.602-1/8 x 0.063
67 x 1.602-5/8 x 0.063
Contact length[mm][Inch]
 
12-165-74-63-42-3
P
P
PPP
P
PP
PP
80-1603.1-6.340-701.6-2.850-1002-3.980-1603.1-6.3150-3005.9-11.8
P = Profile tooth

  • Case-hardening steels, spring steels and ball-bearing steels
  • Rust-proof and acid-resistant steels (ferretic)
  • Nitrided steel, high-speed steel and tool steel
  • Construction, deep-drawn and machining steels
  • Carbon steels, and quenched and tempered steels
  • Cast iron
  • Aluminium / aluminium alloys
  • Non-ferrous metals

Any more questions?

The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.

Current website / language

Other websites

WIKUS FRANCE S.A.S.
WIKUS SIERRAS CINTAS S. de R. L. De C.V
WIKUS Nordic AB
WIKUS AUSTRIA GmbH
WIKUS Saw Technology, Corp
WIKUS Canada Ltd.
WIKUS Saw Technology (Shanghai) Co. Ltd
WIKUS India Pvt. Ltd.